Back to Eqiora docs Skip to main content

CadAuthoredSweptMesh

eqiora::geometry

Struct CadAuthoredSweptMesh 

pub struct CadAuthoredSweptMesh { /* private fields */ }
Description

One accepted authored-face mesh swept inward through its exact target body.

This value has no durable wire. It retains the complete source surface, the immutable one-body target graph, source-relative geometric grading, exact generated layer offsets, the caller work limit, and the accepted affine- tetrahedron mesh. The existing generic Cartesian artifact boundary remains responsible for accepting complete body and boundary correspondence.

Implementations§

§

impl CadAuthoredSweptMesh

Signature links:§CadAuthoredSweptMesh

pub fn through_body( source_surface: &CadAuthoredFaceMesh, target_graph: &CadAuthoredGraph, layers: usize, growth_rate: f64, maximum_tetrahedra: usize, quality_gate: MeshQualityGate, ) -> Result<CadAuthoredSweptMesh, Diagnostic>

Signature links:through_bodyCadAuthoredFaceMeshCadAuthoredGraphusizef64usizeMeshQualityGateResultCadAuthoredSweptMeshDiagnostic

Sweep one accepted full rectangular outer-face mesh through its body.

Layer thickness grows geometrically from the source into the body, so adjacent thicknesses have the caller-supplied ratio. The sweep direction is derived as the negated parent-outward normal and cannot be supplied independently. Every triangular prism is split by the global source- vertex order, which makes the diagonal on a shared vertical quadrilateral independent of either incident triangle’s stored orientation.

§Errors

Returns EQ0901 before volume-topology allocation for an invalid request, a stale or foreign source, a cut or otherwise unsupported target, an incomplete source face, checked-count overflow, a work-limit violation, or non-representable layer offsets. Generated topology is then subject to the unchanged SimplicialMesh EQ0803 orientation and quality gate.

pub const fn source_surface(&self) -> &CadAuthoredFaceMesh

Signature links:source_surfaceCadAuthoredFaceMesh

Accepted source-bound surface realization.

pub const fn target_graph(&self) -> &CadAuthoredGraph

Signature links:target_graphCadAuthoredGraph

Exact one-body authored graph swept by this realization.

pub const fn target_body_bounds(&self) -> AxisAlignedBox3

Signature links:target_body_boundsAxisAlignedBox3

Exact bounds of the target graph’s one admitted body.

pub const fn inward_direction(&self) -> [f64; 3]

Signature links:inward_directionf643

Unit direction from the selected source face into the target body.

pub const fn normal_axis(&self) -> usize

Signature links:normal_axisusize

Global Cartesian axis normal to the source face.

pub const fn sweep_distance_m(&self) -> f64

Signature links:sweep_distance_mf64

Exact target-body width traversed by the sweep, in metres.

pub const fn layers(&self) -> usize

Signature links:layersusize

Number of positive-thickness slabs.

pub const fn growth_rate(&self) -> f64

Signature links:growth_ratef64

Requested adjacent-thickness ratio from the source into the body.

pub fn layer_offsets_m(&self) -> &[f64]

Signature links:layer_offsets_mf64

Generated source-relative layer boundaries, including both endpoints.

pub const fn maximum_tetrahedra(&self) -> usize

Signature links:maximum_tetrahedrausize

Caller-supplied tetrahedron work limit retained with the realization.

pub const fn mesh(&self) -> &SimplicialMesh

Signature links:meshSimplicialMesh

Accepted positively oriented affine-tetrahedron volume mesh.

Trait Implementations§

§

impl Clone for CadAuthoredSweptMesh

Signature links:§CloneCadAuthoredSweptMesh
§

fn clone(&self) -> CadAuthoredSweptMesh

Signature links:§cloneCadAuthoredSweptMesh
Returns a duplicate of the value. Read more
1.0.0 (const: unstable) · Source§

fn clone_from(&mut self, source: &Self)

Signature links:unstableSource§clone_from
Performs copy-assignment from source. Read more
§

impl Debug for CadAuthoredSweptMesh

Signature links:§DebugCadAuthoredSweptMesh
§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Signature links:§fmtFormatterResult()Error
Formats the value using the given formatter. Read more
§

impl PartialEq for CadAuthoredSweptMesh

Signature links:§PartialEqCadAuthoredSweptMesh
§

fn eq(&self, other: &CadAuthoredSweptMesh) -> bool

Signature links:§eqCadAuthoredSweptMeshbool
Tests for self and other values to be equal, and is used by ==.
1.0.0 (const: unstable) · Source§

fn ne(&self, other: &Rhs) -> bool

Signature links:unstableSource§ne&Rhsbool
Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
§

impl StructuralPartialEq for CadAuthoredSweptMesh

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Signature links:Source§AnySized
Source§

fn type_id(&self) -> TypeId

Signature links:Source§type_idTypeId
Gets the TypeId of self. Read more
§

impl<Src, Scheme> ApproxFrom<Src, Scheme> for Src
where Scheme: ApproxScheme,

Signature links:§
§

type Err = NoError

Signature links:§
The error type produced by a failed conversion.
§

fn approx_from(src: Src) -> Result<Src, <Src as ApproxFrom<Src, Scheme>>::Err>

Signature links:§Result
Convert the given value into an approximately equivalent representation.
§

impl<Dst, Src, Scheme> ApproxInto<Dst, Scheme> for Src
where Dst: ApproxFrom<Src, Scheme>, Scheme: ApproxScheme,

Signature links:§
§

type Err = <Dst as ApproxFrom<Src, Scheme>>::Err

Signature links:§
The error type produced by a failed conversion.
§

fn approx_into(self) -> Result<Dst, <Src as ApproxInto<Dst, Scheme>>::Err>

Signature links:§Result
Convert the subject into an approximately equivalent representation.
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Signature links:Source§BorrowSized
Source§

fn borrow(&self) -> &T

Signature links:Source§borrow&T
Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Signature links:Source§BorrowMutSized
Source§

fn borrow_mut(&mut self) -> &mut T

Signature links:Source§borrow_mut&mut T
Mutably borrows from an owned value. Read more
§

impl<T> ByRef<T> for T

Signature links:§
§

fn by_ref(&self) -> &T

Source§

impl<T> CloneToUninit for T
where T: Clone,

Signature links:Source§CloneToUninitClone
Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

Signature links:Source§clone_to_uninit*mut u8
🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
§

impl<T, Dst> ConvAsUtil<Dst> for T

Signature links:§
§

fn approx(self) -> Result<Dst, Self::Err>
where Self: Sized + ApproxInto<Dst>,

Signature links:§ResultSized
Approximate the subject with the default scheme.
§

fn approx_by<Scheme>(self) -> Result<Dst, Self::Err>
where Self: Sized + ApproxInto<Dst, Scheme>, Scheme: ApproxScheme,

Signature links:§ResultSized
Approximate the subject with a specific scheme.
§

impl<T> ConvUtil for T

Signature links:§
§

fn approx_as<Dst>(self) -> Result<Dst, Self::Err>
where Self: Sized + ApproxInto<Dst>,

Signature links:§ResultSized
Approximate the subject to a given type with the default scheme.
§

fn approx_as_by<Dst, Scheme>(self) -> Result<Dst, Self::Err>
where Self: Sized + ApproxInto<Dst, Scheme>, Scheme: ApproxScheme,

Signature links:§ResultSized
Approximate the subject to a given type with a specific scheme.
§

fn into_as<Dst>(self) -> Dst
where Self: Sized + Into<Dst>,

Signature links:§SizedInto
Convert the subject to a given type.
§

fn try_as<Dst>(self) -> Result<Dst, Self::Err>
where Self: Sized + TryInto<Dst>,

Signature links:§ResultSized
Attempt to convert the subject to a given type.
§

fn value_as<Dst>(self) -> Result<Dst, Self::Err>
where Self: Sized + ValueInto<Dst>,

Signature links:§ResultSized
Attempt a value conversion of the subject to a given type.
§

impl<T> DistributionExt for T
where T: ?Sized,

Signature links:§Sized
§

fn rand<T>(&self, rng: &mut (impl Rng + ?Sized)) -> T
where Self: Distribution<T>,

Source§

impl<T> From<T> for T

Signature links:Source§From
Source§

fn from(t: T) -> T

Signature links:Source§from

Returns the argument unchanged.

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Signature links:Source§IntoFrom
Source§

fn into(self) -> U

Signature links:Source§into

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Signature links:Source§IntoEither
Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Signature links:Source§into_eitherboolEither
Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Signature links:Source§into_either_withEitherFnOncebool
Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T> Pointable for T

Signature links:§
§

const ALIGN: usize

Signature links:§usize
The alignment of pointer.
§

type Init = T

Signature links:§
The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Signature links:§usize
Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Signature links:§usize&'a T
Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Signature links:§usize&'a mut T
Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Signature links:§usize
Drops the object pointed to by the given pointer. Read more
Source§

impl<T> Same for T

Signature links:Source§Same
Source§

type Output = T

Signature links:Source§Output
Should always be Self
§

impl<SS, SP> SupersetOf<SS> for SP
where SS: SubsetOf<SP>,

Signature links:§
§

fn to_subset(&self) -> Option<SS>

Signature links:§Option
The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more
§

fn is_in_subset(&self) -> bool

Signature links:§bool
Checks if self is actually part of its subset T (and can be converted to it).
§

fn to_subset_unchecked(&self) -> SS

Signature links:§
Use with care! Same as self.to_subset but without any property checks. Always succeeds.
§

fn from_subset(element: &SS) -> SP

Signature links:§&SS
The inclusion map: converts self to the equivalent element of its superset.
Source§

impl<T> ToOwned for T
where T: Clone,

Signature links:Source§ToOwnedClone
Source§

type Owned = T

Signature links:Source§Owned
The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Signature links:Source§to_owned
Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Signature links:Source§clone_into&mut T
Uses borrowed data to replace owned data, usually by cloning. Read more
§

impl<Src> TryFrom<Src> for Src

Signature links:§
§

type Err = NoError

Signature links:§
The error type produced by a failed conversion.
§

fn try_from(src: Src) -> Result<Src, <Src as TryFrom<Src>>::Err>

Signature links:§Result
Convert the given value into the subject type.
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Signature links:Source§TryFromInto
Source§

type Error = Infallible

Signature links:Source§ErrorInfallible
The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Signature links:Source§try_fromResultTryFromError
Performs the conversion.
§

impl<Src, Dst> TryInto<Dst> for Src
where Dst: TryFrom<Src>,

Signature links:§
§

type Err = <Dst as TryFrom<Src>>::Err

Signature links:§
The error type produced by a failed conversion.
§

fn try_into(self) -> Result<Dst, <Src as TryInto<Dst>>::Err>

Signature links:§Result
Convert the subject into the destination type.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Signature links:Source§TryIntoTryFrom
Source§

type Error = <U as TryFrom<T>>::Error

Signature links:Source§ErrorTryFromError
The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Signature links:Source§try_intoResultTryFromError
Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

Signature links:§
§

fn vzip(self) -> V

§

impl<Src> ValueFrom<Src> for Src

Signature links:§
§

type Err = NoError

Signature links:§
The error type produced by a failed conversion.
§

fn value_from(src: Src) -> Result<Src, <Src as ValueFrom<Src>>::Err>

Signature links:§Result
Convert the given value into an exactly equivalent representation.
§

impl<Src, Dst> ValueInto<Dst> for Src
where Dst: ValueFrom<Src>,

Signature links:§
§

type Err = <Dst as ValueFrom<Src>>::Err

Signature links:§
The error type produced by a failed conversion.
§

fn value_into(self) -> Result<Dst, <Src as ValueInto<Dst>>::Err>

Signature links:§Result
Convert the subject into an exactly equivalent representation.
§

impl<ST, DT> CastableFrom<ST, Initialized, Initialized> for DT
where ST: ?Sized, DT: ?Sized,

§

impl<ST, DT> CastableFrom<ST, Uninit, Uninit> for DT
where ST: ?Sized, DT: ?Sized,

§

impl<T, U> Imply<T> for U
where T: ?Sized, U: ?Sized,

§

impl<T> Read<Exclusive, BecauseExclusive> for T
where T: ?Sized,

Source§

impl<T> Scalar for T
where T: 'static + Clone + PartialEq + Debug,